ANSWERTRIVIA.COM: We ask you, humbly: don't scroll away.

Dear Reader, If you use ANSWERTRIVIA a lot, this message is for you. We're sure you are busy so we'll make this quick: Today we need your help. We don't have salespeople. We depend on donations from exceptional readers, but fewer than 2% give. If you donate just a coffee, lunch or whatever you can today, ANSWERTRIVIA could keep thriving. Thank you.
(Secure PayPal)
*Everything counts! No minimum threshold!
Thank you for inspiring us!

Enter Another Question

10/6/18

What should never touch the lenses?

Quesiton : What should never touch the lenses?



Answer: 10X






What should never touch the lenses? Why must you be careful when you are focusing with the high-powered lens? Start with the lowest objective (coarse adjustment) then adjust your focus to a better resolution with the fine adjustment. Describe the proper procedure for focusing the microscope using the coarse and fine adjustment. When cleaning the lenses use water never rub your lenses dry. Spray water on both sides of the lenses and then use a cotton cloth to wipe it in circular motion. That should keep them cleaner for longer and also prevent them from getting scratched. Think of it a … s the "neutral" position for the lens array. The scanning lens has the greatest working distance of the lens group on the microscope and is far enough away from the slide to avoid crunching the slide (and possibly damaging the lens) when attempting to focus. Whenever a lens on the microscope becomes dirty it should be cleaned with the lens tissue provided. Use a fresh area of tissue to clean each lens; otherwise the dirt will merely be redistributed. If a lens is especially dirty clean it with lens cleaning solution. Thu Sep 26 2013 00:00:00 GMT+0530 (IST) · In addition you should never use water in place of solution for storing your contact lenses. What you're doing: Your contact lenses are bothering you but you don't have solution with you so you use water or your own saliva as "emergency" solution to wash them before popping them back in your eye. Why should you always use the low power objective lens to locate objects mounted on the slide first even if you want to obsserve them with the high-power objective lens? there are two reasons this is a good idea: 1) By progressing from a low objective to a high objective lens it makes it easier to focus on the object. The Microscope ­ Parts and Use ... Also you should never let your eye touch the ocular lens . If your eyelashes touch the lens you are to close. Always remove eyeglasses when viewing through a microscope. If your eyeglass lens … For contact lens wearers it is best to remove lenses before showering swimming or using a hot tub—and contact lenses should never be rinsed or stored in water 1 2 11 12. ... Throw away or disinfect contact lenses that touch water. Here's what you should never do if you wear contact lenses : 1. Handle your contacts without washing your hands first. ... If you touch your contacts without washing your hands you transfer ... Fri Nov 21 2014 00:00:00 GMT+0530 (IST) · Related: Why You Should Never Touch a Receipt With Clean Hands You don’t clean out your lens case after each use. Every single time you use your contact lens case you need to rinse it out with fresh solution and let it dry notes Phan.

No comments:

Post a Comment