[Answer] In most AC circuits the current and voltage are ?

Answer: current / voltage

Most relevant text from all around the web:

In most AC circuits the current and voltage are ? C = capacitance (farad) For a capacitive load the current in an AC circuit leads the voltage by π/2 (90 o ) phase. In a real electrical circuit there is a mix of resistive capacitive and inductive loads with a voltage/ current phase shift in the range -π/2 <= φ <= π/2 as illustrated in the figure below. In most AC circuits the current and voltage are ? current / voltage In a pure resistive circuit the true power (or watts) is equal to the product of the ? and ? . In AC circuits we'll talk a lot about the phase of the current relative to the voltage . In a circuit which only involves resistors the current and voltage are in phase with each other which means that the peak voltage is reached at the same instant as peak current . Terms in this set (96) what affects the output voltage of an ac generator . 1. the number of turns in the armature coils. 2. the speed at which the coils rotate. 3. the flux density of the magnetic field . in 3 phase ac each phase is displaced from the other two by. 120 electrical degrees. Wed Dec 23 2015 · B . in most Ac circuits the load is either more inductive or more capacitive so the current and voltage are out of phase. There is always inductance due to wire length and capacitance due to proximity of the wires....

Disclaimer: 

Our tool is still learning and trying its best to find the correct answer to your question. Now its your turn, "The more we share The more we have". Comment any other details to improve the description, we will update answer while you visit us next time...Kindly check our comments section, Sometimes our tool may wrong but not our users.

Are We Wrong To Think We're Right? Then Give Right Answer Below As Comment