ANSWERTRIVIA.COM: We ask you, humbly: don't scroll away.

Dear Reader, If you use ANSWERTRIVIA a lot, this message is for you. We're sure you are busy so we'll make this quick: Today we need your help. We don't have salespeople. We depend on donations from exceptional readers, but fewer than 2% give. If you donate just a coffee, lunch or whatever you can today, ANSWERTRIVIA could keep thriving. Thank you.
(Secure PayPal)
*Everything counts! No minimum threshold!
Thank you for inspiring us!

Enter Another Question

4/8/20

[Answer] a placeholder module used in Rambus memory configurations?

Answer: C Rimm




Most relevant text from all around the web:


a placeholder module used in Rambus memory configurations? A DIMM that holds data and amplifies a signal before the data is written to the module uses what technology? it uses registers Which memory technology that is no longer used has a 32 bit data bus and 232 pins and requires a placeholder in empty slots ? a placeholder module used in Rambus memory configurations . single-sided. memory chips installed on one side of the module ... The computer memory module speed is specified in catalogs or literature either by the speed in MHz (for example DDR3-xxxx) or in MB/s (for example PC3-xxxx) or both. ... The _____ memory technology has a 32-bit data bus ... A placeholder module used in Rambus memory configurations . Single-sided . Memory chips installed on one side of the module . ... Which of the following memory configurations definitely will not work when populating a ... after placing processor in the socket you need to lock down the lever. most likely result of a correctly installed processor but incorrectly installed cooler. boot process begins but … Which memory technology that is no longer used has a 32-bit data bus 232 pins and requires a place holder in empty slots SDRAM runs synchronized with the system clock Which of the following is true about DIMM technologies ? a placeholder module used in Rambus memory configurations ____ 49. memory chips installed on one side of the module ____ 50. the factor used to determine clock speed between the processor and FSB a. autodetection f. after placing proce...

Disclaimer: 

Our tool is still learning and trying its best to find the correct answer to your question. Now its your turn, "The more we share The more we have". Comment any other details to improve the description, we will update answer while you visit us next time...Kindly check our comments section, Sometimes our tool may wrong but not our users.


Are We Wrong To Think We're Right? Then Give Right Answer Below As Comment
Posted by at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)