ANSWERTRIVIA.COM: We ask you, humbly: don't scroll away.

Dear Reader, If you use ANSWERTRIVIA a lot, this message is for you. We're sure you are busy so we'll make this quick: Today we need your help. We don't have salespeople. We depend on donations from exceptional readers, but fewer than 2% give. If you donate just a coffee, lunch or whatever you can today, ANSWERTRIVIA could keep thriving. Thank you.
(Secure PayPal)
*Everything counts! No minimum threshold!
Thank you for inspiring us!

Enter Another Question

9/27/20

[Answer] What is a control marking?

Answer: Control markings are used to identify the presence of special categories of information such as SCI FGI or RD.




Most relevant text from all around the web:


What is a control marking? Classification Management and Control Markings System Classification Management and Control Markings System CUI Category: Controlled Technical Information | National ... Laser Marking Basic Knowledge | KEYENCE Standardized classification and control markings are the primary means by which the IC protects intelligence sources methods and activities . The proper application and use of these markings enables information sharing while allowing the information to be properly safeguarded from inadvertent or unauthorized disclosure. 710 21 June 2013 MARKING CONTROL POINTS REFERENCE POINTS AND MONUMENTS In general control surveys deal with estab- lished points . To define these points surveyors Figure 12-6.-Field-constructed semipermanent targets. have to mark them. Certain points are made permanent; on the other hand others are temporary. The CUI Control Marking (mandatory) may consist of either “CONTROLLED” or “CUI .” CUI Category Markings (mandatory for CUI Specified). CUI Control Markings and Category Markings are separated by two forward slashes (//). When including multiple categories they are separated by a single forward slash (/). Limited Dissemination Control Markings. Limited NEC Section 409.110 provides marking requirements for industrial control panels. Buying a listed industrial control panel ensures that the control panel will have the appropriate markings . In the event that an industrial control panel is field constructed such as a 12 X 12 box with an overload relay and a push button NEC 409.110 requires seven differe...

Disclaimer: 

Our tool is still learning and trying its best to find the correct answer to your question. Now its your turn, "The more we share The more we have". Comment any other details to improve the description, we will update answer while you visit us next time...Kindly check our comments section, Sometimes our tool may wrong but not our users.


Are We Wrong To Think We're Right? Then Give Right Answer Below As Comment
Posted by at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)